home
about us
newsletter
products

Boat Lifts

Boat Covers

Docks

Flotation

Pontoons

Rail Systems

Sailboats

Track Systems

Water Toys
Anchor Dock Photo Albums
Anchor Dock and Lift Links
conatct us
FLOE Guide-In Systems for Vertical Lifts > Floe Boat Lifts & Accessories

 

Finally, boat lift guide-in systems that allows the whole family
to park the boat perfectly every time without scratching it!

Precision-Park Guide-in System
Vertical entry bumpers mounted to each side allow the boat’s rub rail to make initial contact. The carpeted guides provide a continuous guide surface while two additional vertical bumpers make final contact with the boat’s rub rail for perfect alignment. Adjusts vertically and horizontally on the boat lift for the perfect fit. Available for all V and VSD lifts except the VSD-7500 and the VSD-10000.
Pontoon Full-Length Boat Lift Bunks/Guide-in System
A bunk and guide system all in one. The extended bunks begin guiding your pontoon 16" before entering the lift. Frame is aluminum with a maintenance free composite guide. Enables you to use your boat lift in shallower water because the bunks lift your boat by the frame instead of the pontoons. Adjustable vertically and horizontally. Sold in pairs.

Pro-Park Guide-in System
For boats 18' or longer, Pro-Park has the ultimate "can't miss" double entrance guide-in system. It starts to guide your craft 32" prior to the boat entering the lift and again as you enter the lift. They are designed to be used in combination with another pair of single or double guide-ins at the front of the lift. For smaller, easy to handle boats, you may opt for two pair of single Pro-Park guide-ins.

Guides boat by its rub rail so it never mars or touches the hull. Maintenance free PVC guide tubes covered by SDP fabric. Aluminum attachment framework wtih infinite width adjustment. Sold in pairs of either single or double guide-ins.

New!
Vertical PVC Guide-ins for Pivot Lifts
These new single guide-ins are packaged in pairs and fit the current PWC-1300, as well as the new P-1200 and P-1600 boat lift models. These guides will also work with the discontinued P-800 and P-1000 pivot lifts. Like the guides for the vertical lifts, these attach to the boat lift's (end) main cradle lift beam, are adjustable for width, and have PVC uprights.
Boat Lift Motor Stop - Aluminum/PVC
Stops your boat in the same location every time and keeps you from floating through the boat lift. Aluminum framework with vinyl bumper stops lower unit 27" away from lift cradle.

 

<< back to Floe Vertical & Vertical Screw Drive Lifts