| 
WHEEL KITS ON EVERY DOCK SECTION
FLOE's aluminum modular roll-in docks come standard with wheel
kits on every dock section. This makes them easier to install,
level, maintain and store than all other docks!
 FLOE
docks have double braced dock wheel kits vs. long, unbraced, vertical
pipes.
This makes each dock section completely safe and stable, and eliminates
the sway associated with other style docks. This additional bracing
makes the dock wheel kit more durable when transporting over rough
terrain to and from the water. Dock wheel kits are available to
accommodate water depths from 10” to 114”. If your
water is deeper than 8’ and/or you experience frequent extreme
water depth fluctuation, you may want to consider a FLOE
modular floating dock system.
Bridge-type webbing gives you the strongest strength-to-weight
ratio available in a dock system. This open design allows large
waves to flow through the dock section rather than pounding against
it.
FLOE has wheel kits on every
dock section vs. one wheel kit at the end of a long dock. This
makes it easier to lift the shore-end
of the dock when installing and removing. No matter how long
your dock is, you never have to lift more than half the weight
of one dock section. You can even add a shore-end dock wheel kit
to eliminate lifting when you roll your dock in and out. Wheel
kits on every dock section also eliminate the stress that is normally
put on the center of a long conventional dock when its center
support poles are lifted during transit.
 This
custom dock wheel is only available on a FLOE! FLOE’s dock
wheel is molded of high density plastic and will never go flat
or rot. They are nearly indestructible. Their wide design provides
extra stability to the dock system, and reduces settling into
a soft bottom like narrower wheels.
|
