Anchor Dock and Lift Products - Feature only on a Pier Pleasure Sectional Dock System

Features only on a Pier Pleasure Sectional Dock System

Pier Pleasure systems offer many features and benefits not found on any other dock system. These unique features make them simple to install, level, and remove.

	Each dock section is designed to hold 80 lbs. of water in its 100% welded frame. This feature adds stability and helps to hold the dock system in place during storms, high winds, and wave action. The water is drained by removing the plugs under each section before removal in the fall.
	The 4' x 8' sections are connected end-to-end and side-to-side by our unique inter-locking hinge. The first sections can form a ramp up or down allowing the dock system to adapt to any shoreline. If you have steps, a retaining wall, or another dock and connect our dock, the Starter Hinge will give you the start you need.
	Pier Pleasure's adjustable legs allow leveling from the top of the dock without entering the water. Each leg levels independently and there are no set screws or holes to line up. The leg adjustment carries a full lifetime warranty.
	Our dock legs are braced from side-to-side and front-to-back for maximum stability. There are no leg posts above the dock surface and the legs do not need to be removed. This makes installation, removal, and storage easier. It also maintains a clean appearance.
	Height indicators on each leg make leveling easy and accurate. The indicators show you the distance from the top of the dock to the surface of the water. All bolts, pins, and fasteners in the dock system are stainless steel which means no corrosion, no maintenance, and long-term clean appearance.

Pier Pleasure's design flexibility allows unlimited layout options. Additional sections can easily be added later in any location to modify your layout as your needs change.


Marina Installation Vinyl Surface	Cedar Surface

Large Deck Area

	Dock with Optional Flagpole

< Pier Pleasure Docks & Accessories