Sea-Legs Pontoon Lift - Anchor Dock and Lift Products

Sea-Legs Pontoon Lifts

Watch Sea-Legs in Action! (windows media file) | (quicktime)

The Pontoon Lift

That Goes Where You Go!

Raise your Sea-Legs and go, lower your Sea-Legs and park -- at your dock, sandbars, restaurants, visiting neighbors, shore fishing, getting gas and more.

Secures your boat. No drifting, no anchors, no banging against the dock.

Eliminates bulky, stationary lifts.

Makes it easy to park your boat in high winds and rough water.

Keeps tubes out of the water when pontoon is not in use, avoiding algae and discoloration.

Works in muck and all other lake bottoms.

Does not affect boat performance.

Can be used with any pontoon trailer.

Permanently attaches to your pontoon -- your lift goes where you go!

Product Info for Sea-Legs Twin Tube

(for two-tube pontoon boats)

Two heavy duty hydraulically operated lift modules provide up to 5800 pounds of lift capacity.
Constructed of extruded aluminum alloy tubing and angled to provide strength and corrosion resistance.
Two large 18-inch x 48-inch pads support the pontoon on lake bottom.
Four hydraulic cylinders with steel alloy piston rods supply lifting power.
Single 1-hp pump tucked neatly under a seat activates the hydraulic cylinders.
Pump features an automatic shut-off alarm system to signal that the legs are fully retracted.
Sea-Legs™ can be operated via remote control (optional) or console-mounted switches.
Maximum lift height approximately 72 inches from bottom side of pontoon deck to bottom of pads.
In retracted position, legs tuck neatly within 5 inches of pontoon deck; works with any pontoon trailer, no drag while in water.
Total weight added to boat approximately 300 pounds, evenly distributed.
No drifting, no anchors, no banging against the dock.
Two year limited warranty.

Sea-Legs attach permanently to your boat
so you can take your lift with you wherever you go!

Lift height approximately 6 feet, measureed from
bottom of boat deck to lake bottom.

When not in use, Legs fold up to within 5 inches of pontoon deck, for normal operation in the water or on any pontoon trailer.

Product Info for Sea-Legs Triple Tube

(for three-tube pontoon boats)

Four heavy duty hydraulically operated lift modules provide up to 7500 pounds of lift capacity.
Four large 31” X 10” pads provide maximum support on any lake bottom.
Four hydraulic cylinders with steel alloy piston rods supply lifting power.
Single 1.5 horse power pump tucked neatly under a seat controls the hydraulic cylinders.
Lift height approximately 6 feet, measured from bottom of boat deck to lake bottom.
Triple tube Sea-Legs are designed to always have two modules running at all times.
Works with most triple tube pontoons. Sea-Legs requires 13 inches of clearance between the center tube and the outside tube.
Sea-Legs is not designed to work with IO’s
The performance sheathing must be removed for installation.
Sea-Legs triple is operated by remote control allowing you total control of your lift.

Boat up – Raises your entire pontoon
Boat Down – Lower your entire pontoon

Front up – Raise only the front of the pontoon
Front Down – Raise only the front of the pontoon

Rear up – Raise only the back of the pontoon
Rear Down – Lower only the back of the pontoon

Passenger side up – Raise the passenger side of the pontoon
Passenger side down – Lower the passenger side of the pontoon

Driver side up - Raise the driver side of the pontoon
Driver side down - Lower the side of the pontoon

Sea-Legs attach permanently to your boat
so you can take your lift with you wherever you go!

Total weight added to the pontoon approximately 540 pounds, evenly distributed.

In retraced position, legs tuck neatly within 7 inches of the pontoon deck.

Sea-Legs Remote Control

Remote Control Operation (PDF)

Sea-Legs Canopy

Eliminates the hassle of playpen covers.

Augured posts secure canopy in high winds and rough water.

Lightweight yet durable all-aluminum construction.

Easy to assemble.

The Sea-Legs Canopy offers even greater boating fun and convenience. Forget about messing with your playpen cover - simply drive underneath the canopy and walk off the boat -- no struggles with playpen cover snaps or clips.

Sea-Legs' all-aluminum canopy is lightweight yet sturdy and easy to assemble. Augured support posts provide better support in high winds or choppy waters than conventional lifts. Our unique design lets you adjust canopy length from 22 to 30 feet, making this the only frame you will need, no matter how many times you change boats. Choose a vinyl or fabric top in one of six different colors:


Biscay Blue	Burgundy	Forest Green	Mercury	Sandstone	White

Frequently Asked Questions

What are Sea-Legs?
Sea-Legs are the world’s only portable hydraulic pontoon lift. The product consists of two heavy-duty hydraulically operated lift modules that lift a pontoon boat to a height of up to six feet from the bottom of a lake or river bed.

How much do Sea-Legs cost?
Please contact us for a price quote.

What type of boats can have Sea-Legs?
Sea-Legs will fit on most 18 to 28 foot pontoon boats. Sea-Legs will not work on solid-hull boats nor will they work on tri-tube pontoon boats. (We expect to have a tri-tube version of Sea-Legs available in 2006). Sea-Legs can be installed a new pontoon or added to a used boat. In all cases, though, installation must take place out of water.

Can I install Sea-Legs myself?
Generally, no. In order for your Sea-Legs warranty to be in effect, Sea-Legs must be installed by Anchor Dock & Lift.

What is the lift height?
Sea-Legs will lift a boat 6 feet, measured from the bottom of the pontoon deck to the bottom of a body of water. In order to consistently have your tubes out of the water, Sea-Legs work best in water of around 4 feet or less.

Where can I use Sea-Legs?
Sea-Legs can be used anywhere with water depth of six feet or less. Sea-Legs are most commonly used to replace a conventional lift at a standard dock, but can also be used to park at sandbars or on-water restaurants, for visiting neighbors, shore fishing, getting gas and more.

How long have Sea-Legs been around?
Sea-Legs were first installed commercially in 1994 and are protected by a U.S. patent issued in 1996. There are currently more than 1000 sets of Sea-Legs in operation in the U.S. and Canada.

How are Sea-Legs powered? Do I need an extra battery?
Sea-Legs run off standard marine-grade boat batteries. There is no need for additional power. We recommend a battery of at least 750 cold-cranking amps.

Will Sea-Legs work on all lake bottoms?
Yes. Sea-Legs are being used on all types of lake and river bottom surfaces. As long as your water is not too deep for Sea-Legs (over 5 feet), Sea-Legs will work well on your lake or river bottom. Your local Authorized Sea-Legs dealer may have further information for you, including recommendations from other boaters on your lake who already have Sea-Legs.

How do Sea-Legs keep my boat level?
Your front and back Sea-Legs can be operated independently or in tandem. Thus you can raise or lower the front of your boat, raise and lower the rear or do both at once, in order to compensate for a less than perfectly level lake bottom.

Will Sea-Legs affect my boat’s performance?
No. When fully retracted, Sea-Legs tuck to within 5 inches of your pontoon deck’s bottom, meaning they do not drag in the water as you drive. Sea-Legs’ total weight is about 300 pounds, evenly distributed on the boat.

Do Sea-Legs carry a warranty?
Yes. Sea-Legs carry a two-year limited warranty. The first year covers parts and labor, the second year parts only.

Do I need to do anything to winterize Sea-Legs?
No. We advise that you retract your Sea-Legs fully, pull your boat off your lake or river and winterize and store it as you normally would. There is no need to do anything extra to winterize Sea-Legs.

Where can I see Sea-Legs in action?
With more than 1000 sets of Sea-Legs on the water today, one of the best places to see Sea-Legs may be on your local lake or river.

Watch Sea-Legs in action! View the video now (windows media file) | (quicktime)